How To Remove A Blink Doorbell

How to Remove Ring Doorbell Without Any Tools

Band Video Doorbell is a brilliant product that brings your doorstep to your smart device. Essentially, it completely replaces your doorbell and turns information technology into a speaker/photographic camera/video streaming device. The best function about information technology is, you don't even have to exist at habitation in order to use the speaker or video streaming characteristic that Ring offers. Information technology'southward all done through a dedicated smart app that works seamlessly, as long as you have an internet connectedness.

However, you may want to remove the Ring Video Doorbell at some point, for whatsoever reason. Here's how to practice it.

Why Would Yous Always Remove Information technology?

Well, first and foremost, how does this device work? What is it powered past? It can't be powered by a battery, that would be ridiculous, correct? Well, wrong. Ring Video Doorbell, is, in fact, powered past a battery. This battery, however, tin last between six to twelve months, depending on how often the motion sensor is triggered. At some point, the battery is going to run out, and you lot're going to demand to have it out of the device and recharge it or replace it. To do this, y'all'll have to remove the device itself.

Alternatively, you may simply want to motility the Band device to somewhere else, even if it means by only a few inches. It may have been placed also high or too depression, you may exist moving to a new home, or maybe you desire to place it on your backdoor entrance. Any the case, you desire this process to be as elementary as possible.

Removing Information technology with a Screwdriver

In guild to realize how large of an issue using the screwdriver for Ring installation tin be, let'due south go through the removal procedure. Commencement, y'all're going to take to remove the security screws. In that location should be a tool in the production box that volition help y'all do this. Now, unmount the Band device from the mounting bracket. Y'all probably had to apply a bit of force to mount the thing, so you're likely going to take to use a bit more than force to unmount it. But be careful not to break the mounting bracket.

If you've mounted the bracket on vinyl or wood, all that y'all need to exercise is remove the screws. Non hard, only yous're nonetheless going to be left with those abrasive holes in the wall. Alternatively, if you've mounted the bracket on a concrete, brick, or stucco wall, you've probable used plastic anchors for the holes. These anchors are somewhat of a nightmare to pull out. The all-time way to become is unscrewing the screws and then using the screwdriver in a lever position to force the anchors out.

Either way, removing the Band doorbell with a screwdriver and other tools is definitely not a fun experience. Although the educational activity transmission wants you to install the device using the screws, it might not be the best way to go.

Removing It Without Whatever Tools

To larn how to remove the Ring Video Doorbell without using whatever tools, let's start with an alternative installation process. The whole initial setup process is pretty much the same – you charge the six,000 mAh battery, download the defended app on your smart device, connect the app to your Wi-Fi, and become through the setup process, equally prompted.

At this point, the instruction transmission tells yous to start making the screw marks and screwing the device into your wall. The trick is using permanent outdoor mounting tape. It will make certain that your device remains safely stuck to your wall. Go on an eye out for things such every bit your wall pigment, textile type, etc. and purchase the permanent outdoor tape in accordance.

Y'all could mucilage the Ring device directly onto the wall, without using the mounting bracket, simply and then you'll probable take to repeat the wall-mounting process for each battery replacement. Of course, you lot tin can still utilise the provided mounting bracket, which can be very user-friendly when you demand to temporarily remove the device.

So, what's the benefit of using the mounting tape, compared to the screws? Well, removing the device is much easier with the mounting tape. Additionally, you don't have to drill whatsoever holes in the wall, ruining both the finish and the construction.

What Are the Downsides of Using Tape?

Honestly, there really are none. The kickoff thing that probably comes to mind is the like shooting fish in a barrel-to-remove factor. Wouldn't a thief be able to remove information technology easily, also? Well, non exactly. First of all, they won't suspect that the device is glued to the wall, rather than screwed into information technology. Later all, the tape will take quite an effort to remove.

Additionally, yous'll be notified by the movement sensor. The Ring Video Doorbell device does come with a camera, after all.

Then, How Exercise You Actually Remove Information technology Without Tools?

Fifty-fifty with tape, you should exist careful not to harm the device or your wall. It's recommended that you utilize the provided mounting subclass for easy admission. When removing the whole device, you shouldn't just grab it by the hand and pull. This may interruption its casing or ruin your wall. Instead, utilize a lever with a dull border and gently and slowly pull it towards yourself. If you do this properly, you'll leave your wall and your Band device undamaged.

No Tools, More Ease

The fewer tools you have to use, the easier your life is, that'due south the general rule of thumb. In the example of Ring Video Doorbell, the screws don't really bring anything good to the table, then using the tape is the best way to make sure that you lot tin remove the doorbell with minimum effort, at any time.

Have y'all tried the permanent tape method? Practise y'all adopt it over the screws? Make certain that you hit the comments section with whatever questions. Oh, and feel free to advise any other ways of removing the Ring doorbell without using whatsoever tools.

Source: https://www.techjunkie.com/remove-ring-doorbell-tools/

Share this post